Many people order android big screen for their BMW cars, but don’t know how to install it. This article can help you.
There are TEN steps:
1. Ensure the android system match your car system, such as CCC, CIC, NBT, EVO . Prepare tools bolt driver, Skid, towel (protect car not be scratched ) and some Electrical tape (wrap up some loose harness not used)
2. Pry up the panel, remove OEM original screen, take out CD , please pay attention to the harness, take a photo of what it is plug original.
3. Connect android power harness to CD and original harness, socket needs plug firmly, switch optic fiber cable (if there is), it is very important https://youtu.be/BIfGF_A1E2I
4. Connect LVDS plug
5. Plug USB cable, GPS antenna, 4G antenna, (RCA cable no need if not install rearview camera) to back of android screen. Put USB cable in glove box, GPS antenna to back of car window, 4G antenna in glove box.
6. Plug AUX audio cable in car AUX port for CIC CCC sound.
7. Turn on engine and CD. Check OEM radio display (in android main menu CAR INFO icon), if not good resolution, choose car display in android factory setting , our password is 2018. If connection is correct, radio should display ok and has sound. If not, check connection again. https://youtu.be/a6yyMHCwowo
8. Check car functions, iDrive knob, steering wheel control buttons, reverse etc.
9. Check android sound. change AUX in factory set from auto to manual, back to aux in radio, then check android music, https://youtu.be/QDZnkZIsqIg
10. Everything is ok, turn off engine, install back CD (put the harness outside the space behind CD, put main harness below CD, not block CD body inside car), install android screen to car. Install back panel and trim of car.
Here is video of 10.25inch BMW F30 NBT screen GPS install in car
Here is video of 12.3inch BMW F10 NBT screen GPS install in car
Post time: Oct-29-2022