Introduction
UGODE Android screen upgrade provides an ideal solution for Mercedes-Benz G-Class owners to upgrade the traditional in-car entertainment system to a modern intelligent system. Although the installation process is relatively simple, in order to ensure a smooth completion, the following are detailed installation steps and precautions.
Installation Steps
- Prepare tools and materials
Before you begin installation, make sure you have the following tools and materials:
- UGODE Android Screen
- Screwdrivers (Phillips and flat)
- Pry bar (for removing panels)
- Connection cable (usually comes with the UGODE monitor)
- Cleaning cloth (for cleaning the installation area)
- Gloves (optional, to protect your hands)
Disconnect power
Before any installation, make sure the vehicle’s power supply is disconnected to avoid electrical short circuits or other safety hazards. This can be achieved by removing the car key or directly disconnecting the negative terminal of the battery.
Remove the original display
- Use a pry bar to carefully remove the Mercedes-Benz G-Class center console, being careful not to damage the panel. You can start from the edge and pry it up gently to gradually loosen it.
- Remove the screws securing the original display, usually at the four corners of the screen.
- Carefully disconnect the display cables, making sure not to damage any cables while removing them.
- Connect UGODE Android Screen
- Plug the UGODE Android screen cable into the vehicle’s original cable port and make sure it is firmly connected. There will usually be a mark to ensure it is connected correctly.
- If your UGODE screen supports rear view camera, make sure to connect the rear view camera cable to the new screen as well.
Install the new screen
- Place the UGODE Android screen into the original display screen position, making sure it is firmly fixed.
- Secure the new screen with the screws, making sure they do not come loose. Check that all screws are tight.
Reinstall the center console
- Reinstall the removed center control panel, making sure all clips and screws are securely in place.
- Make sure there is no gap between the panel and the new screen to maintain a clean look.
Connect to power
- Reconnect the vehicle’s power supply and ensure that all electrical systems are functioning properly. You can connect the negative terminal of the battery first and then start the vehicle.
Testing Function
- Start the vehicle and test the various functions of the UGODE Android screen, including Android Auto, Apple CarPlay, GPS navigation and multimedia playback.
- Make sure all functions are functioning properly, especially the rear view camera and audio systems.
Adjust settings
- Adjust the UGODE screen settings according to your personal preferences, including brightness, volume, language, etc. Make sure all functions are in line with your usage habits.
- Ensure compatibility: Before purchasing a UGODE Android screen, confirm that it is compatible with your Mercedes-Benz G-Class model and system version.
- PROCESS WITH CAUTION: During removal and installation, always exercise caution to avoid damaging your vehicle’s interior or your new screen.
- Refer to the Instructions: If your UGODE screen comes with an installation instruction sheet, please read and follow the instructions carefully.
- Seek professional help: If you are not familiar with the installation process, it is recommended to seek help from a professional technician to ensure the correctness and safety of the installation.
Notes
in conclusion
Through the above detailed steps, you can successfully upgrade the UGODE Android screen to your Mercedes-Benz G-Class. This upgrade not only improves the intelligence level of the in-car entertainment system, but also enhances the fun and convenience of driving. Enjoy the driving experience brought by modern technology and give your Mercedes-Benz G-Class a new lease of life!
Post time: Nov-28-2024